Skip to main content

cycler

Point Entity

An entity used to display a model for testing purposes. Shooting it with cycle through the model's animations.

Keyvalues

  • Create Client-Only Entity (clientSideEntity) <Choices>

    • No
    • Yes

  • Minimum CPU Level (mincpulevel) <Choices>

    • default (low)
    • low
    • medium
    • high

  • Maximum CPU Level (maxcpulevel) <Choices>

    • default (high)
    • low
    • medium
    • high

  • Minimum GPU Level (mingpulevel) <Choices>

    • default (very low)
    • very low
    • low
    • medium
    • high

  • Maximum GPU Level (maxgpulevel) <Choices>

    • default (high)
    • very low
    • low
    • medium
    • high

  • Disable X360 (disableX360) <Choices>

    • No
    • Yes

  • Render Mode (rendermode) <Choices>
    Used to set a non-standard rendering mode on this entity. See also 'FX Amount' and 'FX Color'.

    • Normal
    • Color
    • Texture
    • Glow
    • Solid
    • Additive
    • Additive Fractional Frame
    • World Space Glow
    • Dont Render
    • Dev Visualizer

  • FX Amount (0 - 255) (renderamt) <Integer>
    The FX amount is used by the selected Render Mode.

  • FX Color (R G B) (rendercolor) <Color255>
    The FX color is used by the selected Render Mode.

  • Disable Receiving Shadows (disablereceiveshadows) <Boolean>

  • Light Group (lightgroup) <String>
    Will only be lit by lights affecting this group.

  • Start Fade Dist (fademindist) <Float>
    Distance at which the overlay starts to fade (<0 = subtract from fademaxdist).

  • End Fade Dist (fademaxdist) <Float>
    Maximum distance at which the overlay is visible (0 = don't fade out).

  • Fade Scale (fadescale) <Float>
    If you specify a fade in the worldspawn, or if the engine is running under low end/medium end/XBox360, then the engine will forcibly fade out props even if fademindist/fademaxdist isn't specified. This scale factor gives you some control over the fade. Using 0 here turns off the forcible fades. Numbers smaller than 1 cause the prop to fade out at further distances, and greater than 1 cause it to fade out at closer distances.

  • Render to Cubemaps (rendertocubemaps) <Boolean>
    If true, this geometry renders into baked cube maps

  • Lightmap Static (lightmapstatic) <Choices>
    How this geometry influences baked lighting.

    • No
    • Yes
    • Bounce Only

  • Render FX (renderfx) <Choices>

    • Normal
    • Slow Pulse
    • Fast Pulse
    • Slow Wide Pulse
    • Fast Wide Pulse
    • Slow Strobe
    • Fast Strobe
    • Faster Strobe
    • Slow Flicker
    • Fast Flicker
    • Slow Fade Away
    • Fast Fade Away
    • Slow Become Solid
    • Fast Become Solid
    • Constant Glow
    • Distort
    • Hologram (Distort + fade)
    • Cull By Distance (TEST)
    • Spotlight FX
    • Fade Near

  • Parent (parentname) <TargetDestination>
    The name of this entity's parent in the movement hierarchy. Entities with parents move with their parent.

  • Parent Model Bone/Attachment Name (parentAttachmentName) <ParentAttachment>
    The name of the bone or attachment to attach to on the entity's parent in the movement hierarchy. Use !bonemerge to use bone-merge style attachment.

  • Model Attachment position offset (local.origin) <Vector>
    Offset in the local space of the parent model's attachment/bone to use in hierarchy. Not used if you are not using parent attachment.

  • Model Attachment angular offset (local.angles) <Angle>
    Angular offset in the local space of the parent model's attachment/bone to use in hierarchy. Not used if you are not using parent attachment.

  • Model Attachment scale (local.scales) <Vector>
    Scale in the local space of the parent model's attachment/bone to use in hierarchy. Not used if you are not using parent attachment.

  • Use Model Attachment Offset (useLocalOffset) <Boolean>
    Whether to respect the specified local offset when doing the initial hierarchical attachment to its parent.

  • Entity Scripts (vscripts) <ScriptList>
    Name(s) of script files that are executed after all entities have spawned.

  • Name (targetname) <TargetSource>
    The name that other entities refer to this entity by.

  • Spawnflags (spawnflags) <Flags>

    • Not Solid

  • Model (model) <Studio>

  • Skin (skin) <MaterialGroup>
    Some models have multiple versions of their textures, called skins.

  • Test Mode (testMode) <Choices>

    • None
    • Oscillate Pose Parameters
    • Add/Remove Animation Layers
    • Report Animation Events
    • Toggle Base Layer Sequence
    • Test Model Scale
    • Client-Side Ragdoll
    • Use Procedural Bones
    • Reset Sequences

  • Use Client-Side Animation (doClientSideAnimation) <Boolean>

  • Sequence Name (sequenceName) <Sequence>
    Default animation sequence for the model to be playing after spawning.

  • Sequence Name 2 (sequenceName2) <Sequence>
    Used by the 'Toggle Base Layer Sequence' test.

  • Pose Parameter Name (poseParameterName) <String>
    Pose parameter to use for various unit tests

  • Layer 1 Sequence Name (layerSequence1) <Sequence>
    Layer sequence #1 for the Add/Remove Animation Layers test.

  • Layer 2 Sequence Name (layerSequence2) <Sequence>
    Layer sequence #2 for the Add/Remove Animation Layers test.

Inputs

  • Alpha <Integer>
    Set the sprite's alpha (0 - 255).

  • Color <Color255>
    Set the sprite's color (R G B).

  • SetParent <TargetDestination>
    Changes the entity's parent in the movement hierarchy.

  • SetParentAttachment <String>
    Change this entity to attach to a specific attachment point on its parent. Entities must be parented before being sent this input. The parameter passed in should be the name of the attachment.

  • SetParentAttachmentMaintainOffset <String>
    Change this entity to attach to a specific attachment point on it's parent. Entities must be parented before being sent this input. The parameter passed in should be the name of the attachment. The entity will maintain it's position relative to the parent at the time it is attached.

  • ClearParent <Void>
    Removes this entity from the the movement hierarchy, leaving it free to move independently.

  • RunScriptFile <String>
    Load and execute a script file

  • RunScriptCode <String>
    Execute a fragment of script code

  • CallScriptFunction <String>
    Call a script function

  • CallPrivateScriptFunction <String>
    Calls a script function from this entity's private script scope.

  • CallGlobalScriptFunction <String>
    Calls a script function in the global script scope.

  • Kill <Void>
    Removes this entity from the world.

  • KillHierarchy <Void>
    Removes this entity and all its children from the world.

  • AddOutput <String>
    Adds an entity I/O connection to this entity. Parameter format: outputname>targetname>inputname>parameter>delay>max times to fire (-1 == infinite). Very dangerous, use with care.

  • FireUser1 <Void>
    Causes this entity's OnUser1 output to be fired.

  • FireUser2 <Void>
    Causes this entity's OnUser2 output to be fired.

  • FireUser3 <Void>
    Causes this entity's OnUser3 output to be fired.

  • FireUser4 <Void>
    Causes this entity's OnUser4 output to be fired.

  • AddSequenceLayer <Void>
    Adds a random sequence as a new layer

  • ClearAllSequenceLayers <Void>
    Clears all sequence layers

Outputs

  • OnUser1 <Void>
    Fired in response to FireUser1 input.

  • OnUser2 <Void>
    Fired in response to FireUser2 input.

  • OnUser3 <Void>
    Fired in response to FireUser3 input.

  • OnUser4 <Void>
    Fired in response to FireUser4 input.

  • OnKilled <Void>
    Fired when the entity is killed and removed from the game.